



Lastbil flak ny Iveco Daily 70C18 Dieselolja kran
Brådskande- 5 Km
- 7 Ton
- 4x2
- Gdańsk
- Iveco Euro 6
- Iveco
Huvudsaklig information
|
|
---|---|
Webbplatsref.: | 10664437 |
Karosseri | Flak |
Märke | Iveco |
Sortiment (märke : Iveco) | Daily |
Modell | 70C18 |
Tillstånd | Ny |
Datum för första registrering | -- |
Land | POLEN |
Constructeur | Iveco |
Materialets tillstånd |
|
---|---|
Energi | Dieselolja |
Ytterligare information Iveco 70C18 |
|
---|---|
| |
Växellåda | Manuell växellåda |
Däck |
|
---|---|
Däckens tillstånd och storlekar | - |
Tonnage |
|
---|---|
Bruttovikt | 7 Ton |
Vagnskorgens dimensioner |
|
---|---|
Karossens invändiga bredd | 2.25 meter |
Karossens invändiga längd | 3.62 meter |
Karossens invändiga höjd | 0.6 meter |
Egenskaper Iveco Daily - Kran |
|
---|---|
Körsträcka | 5 km |
Styrning | Vänsterstyrd |
Euro-standarder | Iveco Euro 6 |
Axlar | 4x2 |
Land (sortiment) | POLEN |
Tankens kapacitet | 115 L |
Extra kran |
|
---|---|
| |
Bärförmåga | 2700 Kg |
Lyftkapacitet vid bomspetsen | 1.12 Ton |
Arbetsradie | 3.6 meter |
Utrustning Lastbil Iveco |
---|
|
Dimensioner |
|
---|---|
Yta | 8.15 m² |
Volym | 5 m³ |
Motor |
|
---|---|
Effekt | 176 Skattehästkraft |
Slagvolym | 2998 cm3 |
Hyttens utrustning |
|
---|---|
|
Anmärkningar |
---|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
Se allt
|
Anmärkningar |
---|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
Huvudsaklig information
|
|
---|---|
Webbplatsref.: | 10664437 |
Karosseri | Flak |
Märke | Iveco |
Sortiment (märke : Iveco) | Daily |
Modell | 70C18 |
Tillstånd | Ny |
Datum för första registrering | -- |
Land | POLEN |
Constructeur | Iveco |
Materialets tillstånd |
|
---|---|
Energi | Dieselolja |
Ytterligare information Iveco 70C18 |
|
---|---|
| |
Växellåda | Manuell växellåda |
Däck |
|
---|---|
Däckens tillstånd och storlekar | - |
Tonnage |
|
---|---|
Bruttovikt | 7 Ton |
Vagnskorgens dimensioner |
|
---|---|
Karossens invändiga bredd | 2.25 meter |
Karossens invändiga längd | 3.62 meter |
Karossens invändiga höjd | 0.6 meter |
Egenskaper Iveco Daily - Kran |
|
---|---|
Körsträcka | 5 km |
Styrning | Vänsterstyrd |
Euro-standarder | Iveco Euro 6 |
Axlar | 4x2 |
Land (sortiment) | POLEN |
Tankens kapacitet | 115 L |
Extra kran |
|
---|---|
| |
Bärförmåga | 2700 Kg |
Lyftkapacitet vid bomspetsen | 1.12 Ton |
Arbetsradie | 3.6 meter |
Utrustning Lastbil Iveco |
---|
|
Dimensioner |
|
---|---|
Yta | 8.15 m² |
Volym | 5 m³ |
Motor |
|
---|---|
Effekt | 176 Skattehästkraft |
Slagvolym | 2998 cm3 |
Hyttens utrustning |
|
---|---|
|
Anmärkningar |
---|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
Se allt
|
Anmärkningar |
---|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |

Lastbil flak Renault R4 KERAX 410 DXI* KIPPER 6,00m + BORDMATIC/ 8x4

Lastbil flak MAN

Lastbil flak MAN ny 41.480 TGS

Lastbil med släp flak spannmål Scania R 620
